DTC 10: Vehicle Speed Input Signal
WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Start engine and drive vehicle. If LCD indication is ON, vehicle speed input signal to instrument cluster is okay. If LCD indication is OFF on ABS-equipped vehicles, check ABS control module and instrument cluster wiring harness. See WIRING DIAGRAMS . Retest system. On vehicles without ABS, check vehicle speedometer sensor and wiring between vehicle speedometer sensor and instrument cluster. See WIRING DIAGRAMS . Repair or replace as necessary. Retest system.