Test No. 8: All Warning Lights Do Not Illuminate With Key On
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
- Check METER (10-amp) fuse. If METER fuse is okay, go to next step. If METER fuse is blown, repair wiring and replace fuse.
- Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Measure voltage between ground and instrument cluster harness connector No. 3, terminal 3N. See Figure . If battery voltage exists, replace printed circuit. See PRINTED CIRCUIT under REMOVAL & INSTALLATION. If battery voltage does not exist, repair wiring between METER (10-amp) fuse and instrument cluster. See WIRING DIAGRAMS .