GF4A-EL Transmission
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
- Place transmission in Neutral. Disconnect selector cable from Transmission Range (TR) switch. Disconnect TR switch connector.
- Loosen TR switch mounting bolts. Using DVOM, measure resistance between TR switch terminals "A" and "H" while adjusting switch. See Figure . Adjustment is complete when there is continuity between terminals.
- Tighten TR switch mounting bolts to 70-96 INCH lbs. (8-11 N.m). Connect shift cable and TR switch connector. Verify proper operation by cycling transmission through all gears.