Canister Drain Cut Valve
WARNING: This page is about a different car, the 1997 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
Remove Canister Drain Cut Valve (CDCV). See CANISTER DRAIN CUT VALVE LOCATIONS table. Apply air pressure to CDCV port "A". See Fig 1 . Air should flow from port "B". Using jumper wires, apply battery voltage to CDCV terminals. Apply air pressure to port "A". Air should not flow from port "B". If CDCV does not operate as specified, replace CDCV.
CANISTER DRAIN CUT VALVE LOCATIONS
| Application | Location |
|---|---|
| Millenia | Left Side Of Trunk |