EGR Vent Solenoid Valve
WARNING: This page is about a different car, the 1997 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
Remove EGR vent solenoid valve. Refer to the EGR VACUUM/VENT SOLENOID VALVE LOCATIONS table. Apply air pressure to port "A". See Fig 1 . Air should flow from ports "B" and "C". Using jumper wires, apply battery voltage to solenoid valve terminals. Apply air pressure to port "A". Air should flow from port "B" only. Replace solenoid valve as necessary.
EGR VACUUM/VENT SOLENOID VALVE LOCATIONS
| Application | Location |
|---|---|
| Millenia | Right Rear Of Engine Bay |