LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P1132 Or DTC P1152 >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

DTC P1132 (Bank 1) and P1152 (Bank 2) indicates HO2S is indicating rich at the end of a test, trying to correct for over-lean conditions. The test fails when fuel control system no longer detects a switch for a calibrated amount of time.

HO2S detects presence of oxygen in the exhaust and produces a variable voltage according to the amount of oxygen detected. A high concentration of oxygen in the exhaust produces a low voltage signal (less than 0.4 volt). A low concentration of oxygen in the exhaust produces a high voltage signal (more than 0.6 volt). HO2S provides feedback to PCM indicating air/fuel ratio in order to achieve near stoichiometric air/fuel ratio of 14.7:1 during closed loop engine operation.