LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Controls [Removal & Installation]) >> Fuel System >> Fuel System Pressure Release >> Tribute (2.0L)

Tribute (2.0L)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: DO NOT smoke or carry an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.
WARNING: Fuel supply tubes will remain pressurized for long periods of time after engine shutdown. This pressure must be relieved before repairing of the fuel system has begun. Failure to follow these instructions may result in personal injury.
WARNING: Before disconnecting any fuel tube, release the fuel pressure from the fuel system.
  1. Remove the left engine compartment relay panel cover.
  2. Remove the fuel pump relay.
  3. Start the engine.
  4. After the engine stalls, crank the engine over 2 more times to be sure all the pressure has been released.
  5. Turn the ignition switch to the OFF position. Install the fuel pump relay.