LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Controls [Removal & Installation]) >> Fuel System >> Fuel Line Connectors (MIATA) >> Disconnect

Fuel Line Connectors (MIATA): Disconnect

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect that the quick release connector joint area is free of foreign material.
  2. Clean if necessary.
  3. Squeeze the tabs of the retainer and disconnect the quick release connector. See Fig 1.
  4. Cover the disconnected quick release connector and fuel pipe to prevent them from being scratched or contaminated with foreign materials. See Fig 2.
Fig 1: Disconnecting Plastic Fuel Hose - Miata (1 Of 2)
G00256247Courtesy of MAZDA MOTORS CORP.
Fig 2: Disconnecting Plastic Fuel Hose - Miata (2 Of 2)
G00256248Courtesy of MAZDA MOTORS CORP.