Connect (R-Clip Fitting)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the fitting and the tube for damage. Remove any dirt or obstructions.
Insert the R-clip into the fitting. See Fig 1.
Align the tube and the fitting.
Insert the tube in the fitting and push together until a click is heard. See Fig 2.
Pull on the connection to make sure it is fully engaged. See Fig 3.

Fig 1: Installing R-Clip Into Fitting

Courtesy of MAZDA MOTORS CORP.

Fig 2: Connecting Fitting - R-CLip Fitting (1 Of 2)

Courtesy of MAZDA MOTORS CORP.

Fig 3: Connecting Fitting - R-Clip Fitting (2 Of 2)

Courtesy of MAZDA MOTORS CORP.