LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Controls [Removal & Installation]) >> Engine Sensors & Switches >> Throttle Position Sensor >> Removal (Miata)

Removal (Miata)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Throttle Position (TP) sensor harness connector. See Figure.
  2. Remove the attaching screws.
  3. Remove the TP sensor.
scientia non olet · About LEMON Manuals