Installation (Miata)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Verify that the throttle valve is fully closed.
Catch the tang of the throttle body on the TP sensor plastic rotor.
Position the TP sensor on the throttle body so that the mounting holes align.
Install the attaching screws. See TORQUE SPECIFICATIONS .
Release the throttle.