Installation (MPV)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the throttle valve is fully closed.
- Install the TP sensor to the throttle body.
- Adjust the TP sensor.
- Tighten the TP sensor attaching screws. See TORQUE SPECIFICATIONS .
- Verify that the throttle valve moves smoothly.
- Reconnect the TP sensor connector.