Removal & Installation (Tribute 2.0)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the harness connector.
Remove the bolt. See Fig 1.
Remove the Camshaft Position (CMP) sensor. See Fig 1.
To install, reverse removal procedure. See TORQUE SPECIFICATIONS .

Fig 1: Removing & Installing CMP Sensor - Tribute (2.0L)

Courtesy of MAZDA MOTORS CORP.