Miata A/T
WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, 2003 Mazda MPV, and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
VSS is located on side of transaxle/transmission. Disconnect VSS connector. Measure resistance between sensor terminals. See VSS SPECIFICATIONS (MIATA A/T & MPV WITHOUT ABS) table. If resistance reading is not as specified, replace sensor. If resistance reading is as specified, repair or replace wiring harness.
VSS SPECIFICATIONS (MIATA A/T & MPV WITHOUT ABS)
| Application | Temperature - °F (°C) | Resistance - Ohms |
|---|---|---|
| Miata A/T | 68 (20) | 387-473 |
| MPV Without ABS | 68 (20) | 513-627 |