System Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, 2003 Mazda MPV, and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Purge system operation takes place when vehicle is accelerating in gear (off idle), engine is at operating temperature and HO2S is functioning normally. Ensure all vapor lines are connected and in acceptable condition. See Fig 1-Fig 10 .

Fig 1: Identifying Evaporative Emission Components (Mazda6 - 1 Of 5)

G00193578

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Evaporative Emission Components (Mazda6 - 2 Of 5)

G00193579

Courtesy of MAZDA MOTORS CORP.

Fig 3: Identifying Evaporative Emission Components (Mazda6 - 3 Of 5)

G00193580

Courtesy of MAZDA MOTORS CORP.

Fig 4: Identifying Evaporative Emission Components (Mazda6 - 4 Of 5)

G00193620

Courtesy of MAZDA MOTORS CORP.

Fig 5: Identifying Evaporative Emission Components (Mazda6 - 5 Of 5)

G00193621

Courtesy of MAZDA MOTORS CORP.

Fig 6: Identifying Evaporative Emission Components (Miata - 1 Of 2)

G00193618

Courtesy of MAZDA MOTORS CORP.

Fig 7: Identifying Evaporative Emission Components (Miata - 2 Of 2)

G00193616

Courtesy of MAZDA MOTORS CORP.

Fig 8: Identifying Evaporative Emission Components (MPV - 1 Of 3)

G00110083

Courtesy of MAZDA MOTORS CORP.

Fig 9: Identifying Evaporative Emission Components (MPV - 2 Of 3)

G00110084

Courtesy of MAZDA MOTORS CORP.

Fig 10: Identifying Evaporative Emission Components (MPV - 3 Of 3)

G00193622

Courtesy of MAZDA MOTORS CORP.