LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Engine Controls [System & Component Testing]) >> Emission Systems & Sub-Systems >> Fuel Evaporative System (Protege & Protege5) >> System Inspection

System Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, 2003 Mazda MPV, and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Purge system operation takes place when vehicle is accelerating in gear (off idle), engine is at operating temperature and HO2S is functioning normally. Ensure all vapor lines are connected and in acceptable condition. See Fig 1-Fig 3 .

Fig 1: Identifying Evaporative Emission Components (Protege & Protege5 - 1 Of 3)
G00110086Courtesy of MAZDA MOTORS CORP.
Fig 2: Identifying Evaporative Emission Components (Protege & Protege5 - 2 Of 3)
G00193581Courtesy of MAZDA MOTORS CORP.
Fig 3: Identifying Evaporative Emission Components (Protege & Protege5 - 3 Of 3)
G00193619Courtesy of MAZDA MOTORS CORP.