LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Controls [Self-Diagnostics 3.0L]) >> Diagnostic Tests >> DTC P2229: EGR Boost Sensor Circuit - High Input >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

PCM monitors input voltage from EGR boost sensor. If input voltage at PCM 104-pin harness connector terminal No. 34 is 4.9 volts or more, PCM determines EGR boost sensor circuit has a malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals