LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Controls [Self-Diagnostics 3.0L]) >> Diagnostic Tests >> DTC P2127: Accelerator Pedal Position Sensor No. 2 Circuit - Low Input >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

PCM monitors Accelerator Pedal Position (APP) sensor No. 2 signal at PCM 104-pin harness connector terminal No. 10. If PCM detects APP sensor No. 2 voltage of 0.54 volt or less, PCM determines APP sensor No. 2 circuit has a malfunction. This is a continuous monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals