Detection Condition
WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
PCM monitors changes in input voltage for brake switches No. 1 and No. 2. If PCM detects both brake switches No. 1 and No. 2 remain on or off for 15 seconds, PCM determines brake switch circuit has a malfunction. This is a Continuous Monitor (other). MIL does not come on. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.