Detection Condition
WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
The PCM monitors cruise control switch signal at PCM 27-pin harness connector terminal "3P" (Red/Blue wire). If PCM detects any one of following switches (Main, CANCEL, SET/COAST, RESUME/ACCEL) remains on for 2 minutes, PCM determines cruise control switch circuit has a malfunction. This is a Continuous Monitor (other). MIL does not comes on. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.