LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Controls [Self-Diagnostics 2.3L]) >> Diagnostic Tests >> DTC P0328: Knock Sensor Circuit - High Input >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

PCM monitors input signal from Knock Sensor (KS) when engine is running. If input voltage between PCM 30-pin harness connector terminals "2P" and "2S" is more than 4.9 volts, PCM determines that KS circuit has malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals