LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (Automatic Transmission - Overhaul (RC4A-El)) >> Automatic Transmission >> Output Shaft Component Assembly

Output Shaft Component Assembly

WARNING: This page is about a different car, the 2008 Mazda RX-8, 2007 Mazda RX-8, 2006 Mazda RX-8, 2005 Mazda RX-8, and 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the parking gear.
    Fig 1: Installing Parking Gear
    G04331393Courtesy of MAZDA MOTORS CORP.
  2. Install the snap rings.
    Fig 2: Installing Snap Rings
    G04331394Courtesy of MAZDA MOTORS CORP.
  3. Install the ball.
    Fig 3: Installing Ball
    G04331395Courtesy of MAZDA MOTORS CORP.
  4. Install the spacer.
    Fig 4: Installing Spacer
    G04331396Courtesy of MAZDA MOTORS CORP.