General notes
WARNING: This page is about a different car, the 2008 Mazda RX-8, 2007 Mazda RX-8, 2006 Mazda RX-8, 2005 Mazda RX-8, and 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Disassemble the transmission in a clean area (dust-proof work space) to prevent entry of dust into the mechanisms.
- Inspect the individual transmission components in accordance with the QUICK DIAGNOSIS CHART during disassembly.
- Use only plastic hammers when applying force to separate the light alloy case joints.
- Never use rags during disassembly; they may leave particles that can clog fluid passages.
- Because several parts resemble one another, arrange them so that they do not get mixed up.
- Disassemble the control valve component and thoroughly clean it when the clutch or brake band has burned or when the ATF has degenerated.WARNING:
- Although the stand has a self-locking brake system, there is a possibility that the brake may not hold when the transmission is held in a lopsided position on the stand. This would cause the transmission to turn suddenly, causing serious injury. Never keep the transmission tilted to one side. Always hold the rotating handle firmly when turning the transmission.