LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 543 (Power Steering System) >> Steering Gear And Linkage Assembly >> Seal Ring Assembly Note

Seal Ring Assembly Note

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new seal ring to the valve part of the pinion shaft using the SST  .
  2. After installing the new seal ring, seat it properly using the SST  .
  3. Install the snap ring.
    Fig 1: Installing SST Over Seal Rings
    G01930664Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals