LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Entertainment System) >> Diagnostic Assist Function >> Audio amplifier (external) inspection

Audio amplifier (external) inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. With audio on, first press the POWER button and hold it, then press the SCAN button for approximately 1 second. 
  2. Inspect the audio amplifier (external) according to the following table:
    AUDIO AMPLIFIER INSPECTION

    Inspection Display Action
    Start audio amplifier (external) inspection mode. NORMAL
    AMP - On 
    AUDIO AMPLIFIER OPERATING SIGNAL IS OUTPUT    		 Speakers output sound. System is okay.
    Speakers do not output sound. Inspect following parts.
    • audio amplifier (external)
    • Speakers
    • Wiring harness (Base unit - audio amplifier (external))
    MALFUNCTIONING
    AMP - OF 
    AUDIO AMPLIFIER OPERATING SIGNAL IS NOT OUTPUT    		 Replace base unit.
  3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.
scientia non olet · About LEMON Manuals