LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Entertainment System) >> DTC 06: Er10 >> Diagnostic procedure

Diagnostic procedure

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
DTC 06:ER10 - DIAGNOSTIC PROCEDURE

STEP INSPECTION ACTION
1 INSPECT CONNECTOR 
  • Remove CD changer (upper module) and inspect connector for the following.
    • Deformation of pin
    • Poor connection of female terminal
    • Pinching of foreign material
  • Is connector okay?
 Yes Go to next step.
No Repair connector, then go to next step.
2 VERIFY THAT CD CHANGER (UPPER MODULE) IS INSTALLED WITH BASE UNIT 
  • Install CD changer (upper module) and verify its installation condition.
  • Is CD changer (upper module) securely installed?
 Yes Go to next step.
No Securely install CD changer (upper module), then go to next step.
3 INSPECT CD CHANGER (UPPER MODULE) 
  • Clear DTC.
  • Turn ignition switch to ACC or ON position and hold for 3 seconds or more. 
  • Start on-board diagnostic test mode.
  • Is DTC 06:Er10 displayed?
 Yes Replace base unit and CD changer (upper module).
No Troubleshooting completed.
scientia non olet · About LEMON Manuals