Diagnostic procedure
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
DTC 05:ER10 - DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | INSPECT CONNECTOR
|
Yes | Go to next step. |
| No | Reconnected connector, then go to next step. | ||
| 2 | INSPECT WIRING HARNESS BETWEEN CD CHANGER (EXTERNAL TYPE) AND BASE UNIT
|
Yes | Go to next step. |
| No | Securely install CD changer (external type), then go to next step. | ||
| 3 | INSPECT CD CHANGER (EXTERNAL TYPE)
|
Yes | Replace base unit and CD changer (external type). |
| No | Troubleshooting completed. | ||