AEROBOARD Speaker Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the aeroboard speaker. (See AEROBOARD SPEAKER REMOVAL/INSTALLATION .)
Inspect for resistance between the aeroboard speaker terminals using an ohmmeter.
- If not as specified, replace the aeroboard speaker.
Fig 1: Aeroboard Speaker Terminal Connector Continuity
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting For Resistance Between Aeroboard Speaker Terminals
Courtesy of MAZDA MOTORS CORP.