LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 536 (Exterior Trim) >> Top Fabric Repair >> Tears

Top Fabric Repair: Tears

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cut a piece of repair sheet (NC10 R1 211) larger than the damaged section for use as a back repair sheet.
  2. Degrease the repair sheet using ethyl alcohol.
  3. Apply a generous amount of adhesive agent (K180 W0 313) or equivalent to the section being repaired and the back repair sheet. Let stand for a few minutes.
  4. Install the back repair sheet from the underside of the top.
  5. Press the repair sections firmly together.
    Fig 1: Degreasing Repair Sheet Using Ethyl Alcohol
    G03638871Courtesy of MAZDA MOTORS CORP.
  6. Let the top fabric stand until the adhesive agent is fully dry.
    Fig 2: Identifying Back Repair Sheet
    G03638872Courtesy of MAZDA MOTORS CORP.