Rear AIRDAM Skirt Removal (BP With TC)

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fasteners, screws, and bolts.
Remove the rear airdam skirt while cutting away the double-sided adhesive tape using a flathead screwdriver or cutter.
WARNING:
- Using a cutter with bare hands can cause injury. Always wear gloves when using a cutter.
Fig 1: Removing Rear Airdam Skirt (BP With TC)
Courtesy of MAZDA MOTORS CORP.