Convertible Top Installation Note
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the rain rail into the beltline molding lip, and install it over the studs.
- Align and install the link bracket over the studs with no clearance between the studs and the bracket.
- Tighten the installation bolts.
Tightening torque
- 19-25 N.m {1.9-2.6 kgf.m, 14-18 ft.lbf}