LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 532 (Body Panels) >> Hood Adjustment >> Gap Adjustment

Gap Adjustment

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the hood installation nuts and reposition the hood.
  2. Tighten the nuts.
    Fig 1: Adjusting Hood Gap
    G03638682Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals