LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 528 (Control System (HVAC)) >> Climate Control Unit Wire Adjustment >> Air Mix Wire

Air Mix Wire

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the temperature control dial at MAX HOT.
  2. Set the air mix link to MAX HOT in the direction of the arrow and insert a screwdriver into the set hole.
  3. Connect the air mix wire to the air mix link.
  4. Clamp the air mix wire to wire clamp.
  5. Verify that the temperature control dial moves its full stroke.
    Fig 1: Connecting Air Mix Wire To Air Mix Link
    G03638588Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals