Diagnostic Procedure
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
IMPROPER AIR CIRCULATION - DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | INSPECT BLOWER UNIT AIR INTAKE SYSTEM
|
Yes | Go to next step. |
| No | Apply grease or install links and cranks properly and securely, repair or replace wire clamp, then go to Step 6. | ||
| 2 | VERIFY THAT AIR INTAKE WIRE FROM BLOWER UNIT IS POSITIONED SECURELY AND CORRECTLY
|
Yes | Go to next step. |
| No | Adjust air intake wire or install securely in correct position, then go to Step 6. | ||
| 3 | INSPECT CLIMATE CONTROL UNIT
|
Yes | Go to next step. |
| No | Install air intake wire securely in correct position, repair or replace wire clamp, then go to Step 6. | ||
| 4 | INSPECT BLOWER UNIT AIR INTAKE DOOR
|
Yes | Remove obstruction, then go to Step 6. |
| No | Go to next step. | ||
| 5 | VERIFY THAT AIR INTAKE DOOR WITHIN BLOWER UNIT IS POSITIONED SECURELY AND PROPERLY
|
Yes | Check air intake door for cracks or damage, then go to next step. |
| No | Install air intake door securely in proper position, then go to next step. | ||
| 6 | VERIFY THAT MALFUNCTION SYMPTOM DOES NOT OCCUR AFTER REPAIR
|
Yes | Troubleshooting completed. Explain repairs to customer. |
| No | Recheck malfunction symptoms, then repeat from Step 1 if malfunction recurs. | ||