LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (Power Steering System) >> Steering Gear And Linkage Disassembly/Assembly >> Pinion Shaft and Housing Component Disassembly Note

Pinion Shaft and Housing Component Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the socket bolts (2 points) fixing the pinion shaft and housing.
    Fig 1: Removing Socket Bolts Fixing Pinion Shaft And Housing
    G03638491Courtesy of MAZDA MOTORS CORP.
  2. Hold the pinion shaft as shown, and pull out the pinion shaft and housing component.
    Fig 2: Pulling Out Pinion Shaft And Housing Component
    G03638492Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals