Selector Lever Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Verify that the selector lever can be shifted only as shown in the figure.
Make sure there is a click at each range when shifted from the P position to 1 range, and vice versa.
Verify that the positions of the selector lever and the indicator are-aligned.
Verify that the selector lever moves smoothly.
- If not as specified, adjust or repair the selector lever.
Fig 1: Inspecting Selector Lever
Courtesy of MAZDA MOTORS CORP.