Inspection of Continuity

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the OBD trouble code. (See DTC TABLE .)
Remove the TR switch. (See TRANSMISSION RANGE (TR) SWITCH REMOVAL/INSTALLATION .)

Inspect for continuity at the TR switch.

If not as specified, replace the TR switch.

Range/position	Terminals	Continuity
P	D-C	Yes
	I-B	Yes
	Other	No
R	I-F	Yes
R	Other	No
N	D-C	Yes
	I-J	Yes
	Other	No
D	I-H	Yes
D	Other	No
2	I-E	Yes
2	Other	No
1	I-G	Yes
1	Other	No

Fig 1: Identifying TR Switch Connector (View From Terminal Side)

Courtesy of MAZDA MOTORS CORP.

Install the TR switch. (See TRANSMISSION RANGE (TR) SWITCH REMOVAL/INSTALLATION .)