Throttle Cable Inspection
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the throttle cable is adjusted within dimension A as show in the figure below when the throttle cable is in closed throttle position.
- If it is not within specification, adjust the throttle cable. (See
THROTTLE CABLE ADJUSTMENT .)
Dimension A
- 0.8-1.5 mm {0.03-0.05 in}
- If it is not within specification, adjust the throttle cable. (See
THROTTLE CABLE ADJUSTMENT .)