Clutch pipe

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

If any clutch pipe has been disconnected anytime during the procedure, add brake fluid, bleed the air, and inspect for leakage after the procedure has been completed.
If removing the clutch pipe, remove it using the SST (49 0259 770B).
If installing the clutch pipe, change the clutch pipe tightening torque to allow use of a torque wrench-SST (49 0259 770B) combination, and then tighten the clutch pipe using the SST (49 0259 770B). (See TORQUE FORMULAS .)