Flywheel Installation Note
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Wipe the bolts clean, then apply sealant to the bolt threads.
- Install the flywheel, and secure it using the SST.
- Tighten the bolts in the pattern shown.
Tightening torque
- 97-102 N.m {9.8-10.5 kgf.m, 71-75 ft.lbf}
Courtesy of MAZDA MOTORS CORP.