LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 520 (Manual Transaxle Clutch) >> Clutch Release Cylinder Removal/Installation

Clutch Release Cylinder Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Clutch fluid will damage painted surfaces.
  • If clutch fluid does get on a painted surface, wipe it off immediately.
  1. Remove in the order indicated in the table.
    Fig 1: Removing Clutch Release Cylinder
    G03638322Courtesy of MAZDA MOTORS CORP.
  2. Install in the reverse order of removal.