LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 520 (Manual Transaxle Clutch) >> Clutch Master Cylinder Disassembly/Assembly >> Snap Ring Disassembly/Assembly Note

Snap Ring Disassembly/Assembly Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. While holding the piston down with a cloth-wrapped Phillips screwdriver, remove the snap ring.
    Fig 1: Removing Snap Ring Using Screwdriver
    G03638321Courtesy of MAZDA MOTORS CORP.