No. 23 Engine Stalls When Shifted To D, 2,1 Ranges, And/Or In R Position: Notes

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE STALLS WHEN SHIFTED TO D, 2,1 RANGES, AND/OR IN R POSITION - DESCRIPTION & POSSIBLE CAUSE

23	Engine stalls when shifted to D, 2,1 ranges, and/or R position
DESCRIPTION	Engine stalls when shifting from N to P position to D, 2, 1 ranges or R position at idle.
POSSIBLE CAUSE	The malfunction is on engine control side (i. e. IAC control). Otherwise, the malfunction is in TCC circuit (engine always stalls) NOTE: Before following the troubleshooting steps, make sure that the on-board diagnosis and basic inspection have been conducted.