LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 513 (Differential) >> Differential Disassembly/Assembly >> Locknut (Companion Flange) Disassembly Note

Locknut (Companion Flange) Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold the companion flange using the SST  and remove the locknut.
    Fig 1: Holding Companion Flange
    G03638170Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals