LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 512 (Drive Shaft) >> Drive Shaft Disassembly/Assembly (BP) >> Snap Ring Disassembly Note

Snap Ring Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the drive shaft end and inner ring.
  2. Remove the snap ring using snap-ring pliers.
    Fig 1: Removing Snap Ring Using Snap-Ring Pliers
    G03638122Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals