Wheel Bearing Removal Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Press the wheel bearing out using the SSTs.

Fig 1: Pressing Wheel Bearing Out Using SSTs
Courtesy of MAZDA MOTORS CORP.
Move the bearing inner race away from the rear wheel hub component using a chisel.

Fig 2: Moving Bearing Inner Race Away From Rear Wheel Hub Component Using A Chisel
Courtesy of MAZDA MOTORS CORP.
Press the bearing inner race off the wheel hub using the SSTs.

Fig 3: Pressing Bearing Inner Race Off Wheel Hub Using SSTs
Courtesy of MAZDA MOTORS CORP.