Lower Arm Bushing (Knuckle Side) Installation Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Apply soapy water to the lower arm bushing.
Press the bushing in using the SST and a socket in the direction of the arrow.
CAUTION:
- Install the bushing with the mark to the front.
Fig 1: Pressing Bushing In Using SST And A Socket In Direction Of Arrow (Knuckle Side)
Courtesy of MAZDA MOTORS CORP.