LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 508 (Rear Suspension System) >> CROSSMEMBER Bracket Removal/Installation

CROSSMEMBER Bracket Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crossmember bracket.
  2. Install the crossmember bracket.
    Fig 1: Installing Crossmember Bracket & Torque Specifications
    G03638085Courtesy of MAZDA MOTORS CORP.