EGR Boost Sensor (BP), Barometric Pressure (BARO)/Manifold Absolute Pressure (Map) Sensor (BP With TC) Inspection (BP, BP With TC): Notes
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Perform the following test only when directed.
- Inspect the EGR boost sensor (BP), BARO/MAP sensor (BP WITH TC) for damage and cracks.
- Inspect the vacuum hose for improper routing, kinks or leaks.
- If the above are okay, perform the CIRCUIT OPEN/SHORT INSPECTION .
- Reconnect the EGR boost sensor (BP), BARO/MAP sensor (BP WITH TC) connector.
- If the above open or short circuit are correct, replace EGR boost sensor (BP), BARO/MAP sensor (BP WITH TC).