Charcoal Canister Inspection
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the charcoal canister. (See FUEL TANK REMOVAL/INSTALLATION .)
- Plug ports A and B.CAUTION:
- Do not apply more than 20 kPa {150 mmHg, 16 inHg} of pressure to the charcoal canister. Doing so may break the charcoal canister.
- Verify that there is no air leakage when pressure of 20 kPa {150 mmHg, 16 inHg}
is applied to port C.
- If not as specified, replace the charcoal canister.